TTC Topical Workshop on SRF Cryomodule Clean Room Assembly

12 nov. 2014, 08:30 → 14 nov. 2014, 16:30 Europe/Paris

Room A. Berthelot - Building 141 (CEA Saclay)

Dear TTC Collaborators, Dear Colleagues,

CEA-Saclay will be hosting a TTC Topical Workshopon SRF Cryomodule Clean Room Assembly from Wednesday 12 November 2014 to Friday 14 November 2014 in Saclay (France), a few weeks before the TTC Collaboration Meeting at KEK.

The goal of this Topical Workshop is essentially to collect, compare and discuss the best practices on clean room equipment and procedures from various international laboratories on the diversity of low to high beta superconducting RF cryomodules, primarily in order to circumvent the so-called cavity gradient degradation after cryomodule assembly. The experience from industrial microelectronics plants and the optimization of cost and schedule for large series production should also be discussed.

A full program is currently being discussed by the Program Committee. It will cover topics related to:
   - Specifications of clean room infrastructure (ISO4-5, utilities), tools and consumables
   - QC of cavity, coupler, valve, bellows and general hardware
   - Qualification and training of personnel
   - Experience from industrial semi-conductor plants (e.g. particle detectors)
   - Specification of vacuum infrastructure, vacuum equipment and vacuum procedures
   - Dis-assembly/assembly tools and procedures: the mechanical aspects
   - Dis-assembly/assembly tools and procedures: the cleanliness aspects
   - Experience with cavity gradient degradation in cryomodule tests: possible causes and in-situ diagnostics, in-situ cures.

A summary of the Topical Workshop findings will be presented at the TTC Collaboration Meeting at KEK three weeks later.

The Program Committee includes Catherine Madec (CEA), Stéphane Berry (CEA) and Sébastien Bousson (IPN-Orsay)

     Please mark your calendars !

             With my best regards,

                  Olivier Napoly

Practical information CEA Saclay Center access information

mer. 12 novembre ¶

Registration¶

Opening and welcome¶

1 Welcome by the IRFU Director¶

Orateur: Prof. PHILIPPE CHOMAZ (CEA/DSM/IRFU)

2 Workshop objective by the TTC Chair¶

Orateur: Dr Olivier Napoly (CEA-Irfu)

Slides Napoly_Workshop_Objectives.pptx

3 Workshop information and organization¶

Orateur: Mme Catherine MADEC (CEA)

Slides Madec_Workshop_Practical_details.pptx

Clean room caracteristics (ISO4-5, utilities), tools and consumables¶

Clean room caracteristics (ISO4-5, utilities), tools and consumables

Président de session: Paolo MICHELATTO (INFN - LASA)

4 Acceptance criteria for cleanroom infrastructure at DESY¶

Orateur: Axel MATHEISEN

Movie

• Film_1_controls_at_DESY_and_CEA_at_rails_.mp4
• film_2_correted_flow_an_schiene.mp4
• Film_3_flow_at_TMP.mp4
• Film_4_Flow_at_CAV_3.mp4
• film_5_flow_an_vorhang.mp4

Slides Matheisen_DESY_clean_room.ppt

5 JLAB clean room layout and specifications¶

Orateur: Tony REILLY (JLAB)

Slides Reilly_JLab_SRF_Cleanroom_spec.pptx

6 UP Water specification and layout¶

Orateur: Tony REILLY (JLAB)

Slides Reilly_JLab_Ultrapure_Water_Systems.pptx

7 Clean room specifications for projects¶

Orateur: Stéphane BERRY (CEA/IRFU/SACM/LIDC2)

Slides Berry_clean_room_spec.pptx

8 FermiLab clean room specifications¶

Orateur: Tug ARKAN (FERMILAB)

Slides Arkan_Tug_clean_room.ppt

9 Clean room infrastructure for the IHEP ILC test cryomodule assembly¶

Orateur: Jiyuan ZHAI (IHEP)

Slides Jiyuan_Zhai_Clean_Room_Infrastructure_at_IHEP.pptx

10 Open discussion¶

Orateur: ALL

Slides Convener_slides_Michelato_clean_room.pptx

11:00 Coffee Break

Qualification and training of personnel¶

Président de session: Eiji KAKO (KEK)

11 DESY experiences on education and training of personnel¶

Orateur: Axel MATHEISEN (DESY)

Movie

• Film_1_correct_movements.mp4
• film_2_doors.mp4
• film_3_personal_at_power_coupler.mp4
• Film_4_open_coupler_port.mp4
• Film_5_cleaning__bore_holes.mp4
• Film_6_assembly_of_flange_on_power_coupler.mp4

Slides Matheisen_DESY_ttc_personnel.ppt

12 Staff training for SNS, and CEBAF C-100/C-50 upgrades¶

Orateurs: Joseph PREBLE (JLAB), Tony REILLY (JLAB)

Slides Reilly_JLab_SRF_Operations_Staffing_and_Training.pptx

13 Experience with Alsyom training for XFEL¶

Orateur: Dr Bernard Visentin (DAPNIA/CEA)

14 Open Discussion on the first two topics¶

Orateur: ALL

13:00 Lunch

QC of cavities, couplers, valves, bellows and general hardware¶

Président de session: Axel MATHEISEN (DESY)

15 STFC cleanroom experience¶

Orateur: Philippe GOUDKET (STFC Daresbury)

Slides Goudket_TTC_SRF_Cleanroom.pptx

16 C-ADS injector II cryomodule assembly hardware preparation¶

Orateur: Hao GUO (IMP Lanzhou)

Slides Hao_Guo_Cleaning_room_assembly_of_C-ADS_injectorII_cryomodule.pptx

17 Clean room assembly of the IHEP ILC test cryomodule: component preparation and QC¶

Orateur: Jiyuan ZHAI (IHEP)

Slides Zhai_Jiyuan_Clean_Room_Component_Preparation_and_QC_IHEP.pptx

18 Experience with hardware preparation for XFEL¶

Orateur: Stéphane BERRY (CEA/IRFU/SACM/LIDC2)

Slides Berry_QC_of_hardware.pptx

19 Open Discussion¶

Orateur: ALL

16:15 Coffee Break

Experience from other industrial application¶

Président de session: Mme Catherine MADEC (CEA)

20 CERN Experience¶

Orateur: Guillaume ROSAZ (CERN)

Slides Rosaz_TTC.pptx

21 Carl Zeiss EUV-Lithotool: Particle and cleanliness challenges¶

Orateur: Rüdiger DÜSING (CARL ZEISS SMT)

Slides Dusing_Particular_Contamination_while_Lithotool_fabrication_TTC_Confe....pdf

Lab Tour: (Group 1)¶

jeu. 13 novembre ¶

Specification of vacuum infrastructure, vacuum equipment and vacuum procedures¶

Président de session: Tug ARKAN (FERMILAB)

22 Vacuum procedures for Spiral-2 cryomodules¶

Orateur: Claude MARCHAND

Slides TTC-Spiral2-vacuum_Marchand.pdf

23 Experience for vacuum plants during XFEL cavity production at the companies and at LASA¶

Orateur: Paolo MICHELATO (INFN LASA)

Slides vacuum_paolo.pptx

24 UHV cleaning detailed steps¶

Orateur: Tony REILLY (JLAB)

Slides JLab_UHV_Component_Cleaning_Ari_Nov_13_2014.pptx

25 Vacuum experiences on XFEL BQU preparation¶

Orateur: Marco SCHALWAT (DESY)

Slides Vaccum_experiences_on_XFEL_BQU_preparation_.ppt

26 Procedure and results of cavity baking in clean room for the high beta Spiral-2 QWRs¶

Orateurs: Dr Guillaume Olry (IPN Orsay), Sébastien BOUSSON (IPN Orsay)

Slides Bousson_Spiral2_QWR_baking.pptx

10:45 Coffee Break

Specification of vacuum infrastructure, vacuum equipment and vacuum procedures¶

Président de session: Tug ARKAN (FERMILAB)

27 Vacuum groups and procedure/uses at Fermilab (R&D / production)¶

Orateur: Allan ROWE (FERMILAB)

Slides Rowe_Allan_TTC-cleanroom_topical.pptx

28 Experience with vacuum system from DESY and CEA solutions¶

Orateur: Stéphane BERRY (CEA/IRFU/SACM/LIDC2)

Slides 2014-11_P_Berry_vacuum_system.pptx

29 Vacuum related procedures and tools for clean room assembly of the IHEP ILC test cryomodule¶

Orateur: Jiyuan ZHAI (IHEP)

Slides Jiyuan_Vacuum_Related_Procedures_and_Tools_of_IHEP.pptx

30 Cavity string/Cryomodule assembly in KEK/STF¶

Orateur: Yasuchika YAMAMOTO (DESY/KEK)

Slides Procedure_of_Assembly_Work_in_Clean_Room_at_KEK-STF.pptx

31 Open discussion¶

Orateur: ALL

13:00 Lunch Break

Disassembly/assembly tools and procedures: the mechanical aspects¶

Président de session: Sébastien BOUSSON (IPN Orsay)

32 Cryomodule assembly procedure for cERL main linac¶

Orateur: Kensei UMEMORI (KEK)

Slides TTC_Module_assembly_Umemori.pdf

33 Survey on cavity degradation procedure under disassembly/assembly process for cERL main linac cryomodule¶

Orateur: Hiroshi SAKAI (KEK)

Slides TTC_CR_WS_survey_degradiation_141113_2.ppt

34 Plans for IFMIF string assembly¶

Orateur: Nicolas BAZIN (CEA)

Slides TTC-Topical_Workshop_NBazin.pptx

35 FermiLab experience with assembly¶

Orateur: Tug ARKAN (FERMILAB)

Slides FermiLabExperienceStringAssembly.ppt

36 DESY assembly infrastructure for XFEL BQU preparation¶

Orateur: Marco SCHALWAT (DESY)

Slides DESY_assembly_infrastructure_for_XFEL_BQU_preparation.ppt

16:00 Coffee Break (and group photo at 16:20)

Disassembly/assembly tools and procedures: the cleanliness aspects¶

Président de session: Dr Stéphane BERRY (CEA/IRFU/SACM/LIDC2)

37 DESY experiences on assembly procedures for cavity and string¶

Orateur: Axel MATHEISEN (DESY)

Slides Matheisen_DESY_ttc_procedure.ppt

38 CEA experience with cavity assembly:cleanliness aspects¶

Orateur: Stéphane BERRY (CEA/IRFU/SACM/LIDC2)

Slides 2014-11_P_Berry_clean_assembly.pptx

39 Experience of cavity cleanliness degradation on SP2 cryomodules¶

Orateurs: Dr Guillaume Olry (IPN Orsay), Sébastien BOUSSON (IPN Orsay)

Slides Bousson_Spiral2_experience_on_cavity-cleanliness-degradation.pptx

40 Pros and cons of gas overlay (flushing) during string assembly¶

Orateur: Axel MATHEISEN (DESY)

Movie

• Film_1_coupler_with_and_without_flow_.mp4
• film_2_flow_at_beamtube_open_no_N2.mp4
• Film_3_open_flange_with_overly_and_bur.mp4
• Film4__insert_fibers_to_open_cavity_3_1.mp4

Slides Gas_overlay_.ppt

41 Spiral-2 cryomodule assembly in clean room¶

Orateur: M. Claude MARCHAND

Slides TTC-Spiral2-CRA_Marchand.pdf

42 Open discussion¶

Orateur: ALL

Workshop Dinner¶

ven. 14 novembre ¶

Experience with cavity gradient degradation in cryomodule tests¶

Président de session: Camille GINSBURG

43 Cavity gradient degradation in Cryomodule tests in KEK/STF¶

Orateur: Yasuchika YAMAMOTO (DESY/KEK)

Slides Cavity_Gradient_Degradation_in_Cryomodule_Tests_in_KEK-STF.pptx

44 RF as a cleaning tool¶

Orateur: Mircea STIRBET (JLAB)

Slides RF_as_cleaning_tool_14_Nov_2014_-_Stirbet.pptx

45 Upgrade of the superconducting RF cavities at soleil¶

Orateur: M. KEIHAN TAVAKOLI (Synchrotron SOLEIL)

Slides TAVAKOLI_Keihan_TTC_CEA_V3.pptx

46 Qualification of procedure and cavity protection during warm section assembly to Spiral2 cryomodule¶

Orateur: Dr Guillaume Olry (IPN Orsay)

Slides OLRY_TTC_Topical_Saclay_2014.pptx

47 Cavity gradient degradation in XFEL cryomodule tests¶

Orateur: Denis KOSTIN (DESY)

Slides XFEL_module_degradation_Kostin.pptx

10:30 Coffee Break

Session 11: Experience with cavity gradient degradation in cryomodule tests¶

Président de session: Dr Olivier Napoly (CEA-Irfu)

48 Measurement results of cavity gradient degradation of cERL main linac cryomodule under long beam operation¶

Orateur: Hiroshi SAKAI (KEK)

Slides TTC_CR_WS_sakai_141114_Beam_final.ppt

49 Study on He processing and HPR for recovery from field emission¶

Orateur: Kensai UMEMORI (KEK)

Slides TTC_He_process_HPR_umemori.pdf

50 Preparation procedure and RF conditioning of cERL main linac power coupler¶

Orateur: Hiroshi SAKAI (KEK)

Slides TTC_CR_WS_cERLMLcoupler_sakai_141114_final.ppt

51 Open discussion¶

Orateur: ALL

Wrap-up and closing¶

Présidents de session: Mme Catherine MADEC (CEA), Dr Stéphane BERRY (CEA/IRFU/SACM/LIDC2), Sébastien BOUSSON (IPN Orsay)

13:00 Lunch Break

Lab Tour: (Group 2)¶